MENU CLOSE

CHEMICAL BLACKING.

Chemical Blacking helps to preserve the metal from corrosion which gives a decorative black finish on most ferrous surfaces. This is quite critical on screw thread and bearings.

SHOT PEENING

The shot peening process is the most cost effective and practical method of inducing surface residual compressive stresses.

ALUMINIUM OXIDE BLASTING

Aluminium oxide blasting is a form of abrasive blasting that involves propelling abrasive media using compressed air onto the surface of metal components.

GLASS BEAD BLASTING

Glass bead blasting is a gentler process that will enhance the finish of machines parts and produce a bright, non-glare subtle finish.

PROTECTIVE COATING

Metallic coatings provide a layer that changes the surface properties of the workpiece to those of the metal being applied. The workpiece becomes a composite material exhibiting properties generally not achievable by either material if used alone.

CHEMICAL BLACKING

Chemical Blacking helps to preserve the metal from corrosion which gives a decorative black finish on most ferrous surfaces. This is quite critical on screw thread and bearings.

VAPOR BLASTING

Vapor blasting uses water with media which is recycled around the machine. The water buffers the media when it hits the component giving a smooth finish, especially on stainless steel and aluminium, without damaging the metal.

Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection.To achieve maximal corrosion resistance the black oxide must be impregnated with oil or wax. One of its advantages over other coatings is its minimal buildup.