ALUMINIUM OXIDE BLASTING.
Aluminium oxide blasting is a form of abrasive blasting that involves propelling abrasive media using compressed air onto the surface of metal components to remove paint or any other contaminate from its surface. The service is used by our customers who wish to refurbish components.
The shot peening process is the most cost effective and practical method of inducing surface residual compressive stresses.
ALUMINIUM OXIDE BLASTING
Aluminium oxide blasting is a form of abrasive blasting that involves propelling abrasive media using compressed air onto the surface of metal components.
GLASS BEAD BLASTING
Glass bead blasting is a gentler process that will enhance the finish of machines parts and produce a bright, non-glare subtle finish.
Metallic coatings provide a layer that changes the surface properties of the workpiece to those of the metal being applied. The workpiece becomes a composite material exhibiting properties generally not achievable by either material if used alone.
Chemical Blacking helps to preserve the metal from corrosion which gives a decorative black finish on most ferrous surfaces. This is quite critical on screw thread and bearings.
Vapor blasting uses water with media which is recycled around the machine. The water buffers the media when it hits the component giving a smooth finish, especially on stainless steel and aluminium, without damaging the metal.
Aluminium oxide blasting is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds; the effect is similar to that of using sandpaper, but provides a more even finish with no problems at corners or crannies. Sandblasting can occur naturally, usually as a result of particles blown by wind causing aeolian erosion, or artificially, using compressed air.